Upload your desired AnyConnect Package to Secure Firewall Threat Defense using Firewall Device Manager

Procedure

Step 1

Using a browser, open the home page of the system. For example, https://ftd.example.com.

Step 2

Log into Firewall Device Manager.

Step 3

Click View Configuration in the Device > Remote Access VPN group. The group shows summary information on how many connection profiles and group policies are currently configured.

Step 4

Click the view () button (View configuration button.) to open a summary of the connection profile and connection instructions.

Note

You can edit any one of the connection profiles to upload the AnyConnect package to the FDM-managed device.

Step 5

Click the Edit button to make changes.

Step 6

Click Next until the Global Settings screen appears. The AnyConnect Package shows AnyConnect packages available on the FDM-managed device.

Step 7

Click 'X' button to remove the AnyConnect package which you want to replace.

Step 8

Click Upload Package and then click the OS that you want for uploading the compatible package.

Step 9

Select the package and click Open. You can see the package being uploaded on the Firewall device manager UI.

Step 10

Click Finish. The configuration is saved.

Note

Alternatively, you can use the Firewall device manager API explorer to remove and upload a new AnyConnect package.

  1. Edit the URL to point to /#/api-explorer, for example, https://ftd.example.com/#/api-explorer.

  2. Delete a package from the FDM-managed device, click AnyConnectPackageFile > Delete. In the objID field, type the package id and click TRY IT OUT!.

  3. Upload a new package by performing the steps that are described in the Upload AnyConnect Software Packages to Firepower Threat Defense Devices section.

Step 11

Click the Deploy Changes icon in the upper right of the web page. The icon is highlighted with a dot when there are undeployed changes.

Step 12

If you are satisfied with the changes, you can click Deploy Now to start the job immediately. The window shows that the deployment is in progress. You can close the window, or wait for the deployment to complete.