Disconnect Remote Access VPN Sessions on FDM-Managed Device

Currently, it is not possible to terminate remote access VPN sessions on an FDM-managed device using the CDO interface. Instead, you can connect to the Threat Defense CLI using SSH and disconnect the desired user. You can perform this task on an online FDM-managed device onboarded to CDO.

Procedure


Step 1

Log on to Firewall device manager and use the device CLI as explained in the Logging Into the Command Line Interface (CLI) section of the "Getting Started" chapter of the Cisco Firepower Threat Defense Configuration Guide for Firepower Device Manager for the version your device is running.

Step 2

Execute the vpn-sessionsdb logoff {name} command and replace name with the user name. This command terminates all sessions for the username that you specify.